*商品説明:
- 【ラピッドアダプター】ラピッドアダプターはロック式のアダプターで、デバイス間の素早い切り替えが可能です。フラットヘッドライトスタンドやブームアームなどに対応しています。
- 【高品質で軽量】高品質のアルミニウム合金製で、頑丈で耐久性があり、重さはわずか0.08kgで持ち運びに便利です。
- 【多機能1/4"ネジ】上部に1/4"ネジが装備されており、写真用ビデオライト、リングライト、ボールヘッドなど、1/4"ネジ穴付きのさまざまなタイプの写真機材に適しています。
- 【設置簡単】ラピッドアダプターをライトスタンド(ライトスタンドは含まれていません)に取り付け、ノブを回してしっかりと固定します。最後に1/4ネジ穴でデバイスを取り付けます。
*仕様:
材質:アルミニウム合金
サイズ:5x4x2.5cm
重量:35g
*パッケージ内容:
2xラピッドアダプター

NEEWER 2個 ST12 変換用アダプターセット
レビュー
4.5
/5
4 レビュー
5
2
4
2
3
0
2
0
1
0
クリックして確認:
最近
10

11/02/2023
LB
Leslie Bradley
Overall great product, does the job!Used to connect my custom built directors monitor to a C-Stand.Positives:- Main body is well built- Connects to C-Stand (Horizontal & Vertical)Improvements:- Screw used to tighten feels plastic, would need to use a stronger screw- Pack doesn’t include washers/ spacers. Had to add two washers to have the adapter rotated in a certain position to easily reach the tightening screw
09/26/2023
AR
Adam R.
I have a number of the smaller Aputure/Amarin lights which I like very much. The problem Im run into is that they only have 1/4x20 sockets in their shells/cases. While we are seeing them more often, on professional sets lights are typically mounted on a light stand which has a 5/8" stud. Many of the adapters I found have particularly long 1/4x20 screws which if fully tightened into their corresponding threaded holes on the lights (Amaran P60X for example) can damage the instrument due to the screw simply going in too far. These adapters are perfect for that use! I also add some locktite to keep the adapter from unscrewing and this has worked very well for me.
06/27/2022
C
camm
カメラ穴があれば、どの機器にもダボネジを取り付けられる形状に変換できるアダプターです。先端は1/4インチネジとなっていて、ナットも取り付けられています。このナットの位置を調整することで、ねじ込む向きを調整できます。安定性もまあまあ有るので使用上問題ありません。ただ、ナットが小さいので、細めのモンキーレンチが無いと締め付ける際に手が届かないのが少々不満。ホットシューアダプターのように幅が広い物を用意してくれた方が使いやすかったです。(なんなら使ってないホットシューアダプターの皿を取り外して、この製品に取り付けするような工夫も出来なくは無いですがw)この製品以外にあまり選択肢が無いので、今後類似した製品が登場してくれると嬉しいですね。
09/27/2021
ラ
ランピオン
照明用に購入。商品解説がやや分かりづらく心配でしたが、問題なくしっかり使えます。